plans to make a child bed in the off-road style

Plans to create a baby bed in the style of an SUV.
This project presents a plan for making a baby bed in the style
of an off-road car. The design features of the bed are preserved
, but there is no complicated carpentry, although the presence of carpentry equipment
and skills to work on it is necessary. If you are not sure that you can handle
this job, it would be better to transfer the project to any carpentry workshop
so that experienced craftsmen do everything for you themselves.
The bed can be made and assembled in the workshop, and then disassembled in parts
move it to the nursery and reassemble it. This will not be too difficult
, since all the details of the bed are small in size. The largest, as well
as the heaviest part, is the mattress grate, although it can be easily
inserted entirely, since its length is less than the length of a standard doorway.
But if desired, it can also be brought in parts, assembled to the state of the finished
product already indoors.
In the manufacture of the bed, wooden boards, a small piece
of wooden furniture board or plywood (for the radiator grille), a 6 mm thick MDF sheet and
polypropylene pipes (caps of rolled rods) are used for the rear frame of the pipe.
According to this project and the materials used, the bed turns out to be durable
and, most importantly, safe for use by children.

List of materials
2×4 (38*89 mm) — length 8 feet (244 cm) — 8 pcs.
2×4 (38*89mm) — length 4ft (122cm) — 1pc
4×4 (89*89mm) — length 4ft (122cm) — 1pc
3×3 (64*64mm) — length 8ft (244cm) — 4pcs
3×3 (64*64mm) — length 4 feet (122cm) — 1pc
3×4 (89*64mm) — length 8 feet (244cm) — 3pcs

2×8 (38*184mm) — length 8 feet (244cm) -2pcs
2×2 (38*38 mm) — length 8 feet (244 cm) -2pcs
2×6 (38*140 mm) — length 4 feet (122 cm) -1pc
3×6 (64*140 mm) — length 8 feet (244 cm) -1pc
3×6 (64*140 mm) — length 4 feet (122 cm) -1 piece

furniture wooden board 44.5″X21″X3/4″ (1130 * 527 * 20 mm)
MDF sheet 2800*2070 6 mm thick
polypropylene pipe PN10 50×8.4 — 14 feet long (430 cm)
polypropylene pipe PN10 33×5.4 — 7 feet long (215 cm)

Bolts
Screws
sandpaper
Glue
Primer for wood
paint